<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML style="FONT-SIZE: x-small; FONT-FAMILY: MS Sans Serif"><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1106" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial>#4...continuation of sharp mortise as the keys are made as
one unit *then* sliced apart.</FONT></DIV>
<DIV><FONT face=Arial></FONT> </DIV>
<DIV><FONT face=Arial>#3...sort of...again has to do with the cutting
process. This is found on many keys.</FONT></DIV>
<DIV><FONT face=Arial></FONT> </DIV>
<DIV><FONT face=Arial>#2...yep, seen this on lots of keys, although generally
not in combination with #3. I think it has to do with a more stable
glueing surface. Any comments on that one anyone?</FONT></DIV>
<DIV><FONT face=Arial></FONT> </DIV>
<DIV><FONT face=Arial>#1...Kimball made some players with no fold down
keyslip. There was a drop open door. Therefore it is possible to
have replaced the original with a conventional keyslip. There should
be other signs within the case like empty screw holes. These may be
minimal and could be limited to just a couple in the bottom as part of the pump
mounting.</FONT></DIV>
<DIV><FONT face=Arial></FONT> </DIV>
<DIV><FONT face=Arial>Debbie</FONT></DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=tune4u@earthlink.net href="mailto:tune4u@earthlink.net">Alan
Barnard</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=pianotech@ptg.org
href="mailto:pianotech@ptg.org">Pianotech List</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Monday, June 05, 2006 6:12 PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Key structures ...</DIV>
<DIV><BR></DIV>
<P>
<DIV><FONT size=3>Four questions I can't answer:</FONT></DIV>
<DIV><FONT size=3></FONT> </DIV>
<DIV><FONT size=3>1. This is a key stick from an old Kimball upright
which, judging from the trapwork, MIGHT have been a player, although there is
no folding control bar in the front, just a normal keyslip, and no other
evidence of "stuff" ever mounted to the case. Did some companies make
piano models that could optionally be fitted for a player mechanism or just
sold as a regular piano?</FONT></DIV>
<DIV><FONT size=3></FONT> </DIV>
<DIV><FONT size=3>2. Each key has an extra layer laminated to the top,
just the same length as the key covering (in this case a very tenacious,
rubbery plastic), so it sticks up about 3/16" higher than the rest of the key.
Wassup widdat?</FONT></DIV>
<DIV><FONT size=3></FONT> </DIV>
<DIV><FONT size=3>3. Then there is the inserted piece below that, over
the front rail pin area. Did they, maybe, cut the front rail slot all the
way through the key, then glue on little caps?</FONT></DIV>
<DIV><FONT size=3></FONT> </DIV>
<DIV><FONT size=3>4. And then there is the narrow notch, at the bottom
just left of center in the picture. I've seen these before but don't have a
clue what they're for. There is nothing different about the key bed, so what's
with the notch? </FONT></DIV>
<DIV><FONT size=3></FONT> </DIV>
<DIV><FONT size=3><IMG alt="" hspace=0
src="cid:002d01c688f8$755d3ef0$ad429c04@D5XVKT41" align=baseline
border=0></FONT></DIV>
<DIV><FONT size=3></FONT> </DIV>
<DIV><FONT size=3>Thanks.</FONT></DIV>
<DIV><FONT size=3></FONT> </DIV>
<DIV><FONT size=3>Alan Barnard</FONT></DIV>
<DIV><FONT size=3>Salem, Missouri</FONT></DIV>
<DIV> </DIV>
<P></P></BLOCKQUOTE></BODY></HTML>