<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=Content-Type content="text/html; charset=iso-8859-1"> <META content="MSHTML 6.00.2900.2873" name=GENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=#ffffff> <DIV><FONT face=Tahoma size=2>    David, would there be a possibility of wet sanding the keytop with finer and finer paper until you can use finer and finer polish to bring up the gloss?  This might be a good first step rather than try to remove and replace the keytop and hope it matches the rest.  It could even be a timesaver.  If you HAVE to replace, I'd try a heat gun to carefully loosen the adhesive and pry up the old top to remove.  BTW, where is Wangaratta, we're visiting your country in November (respond privately).</FONT></DIV> <DIV><FONT face=Tahoma size=2>    Mike Kurta</FONT></DIV></BODY></HTML>