<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=US-ASCII">
<META content="MSHTML 6.00.2900.2873" name=GENERATOR></HEAD>
<BODY id=role_body style="FONT-SIZE: 10pt; COLOR: #000000; FONT-FAMILY: Arial"
bottomMargin=7 leftMargin=7 topMargin=7 rightMargin=7><FONT id=role_document
face=Arial color=#000000 size=2>
<DIV>
<DIV> Hi Jack</DIV>
<DIV> It looks kinda familiar. I also made one like this for the
bass. I embedded a flat headed screw in the small foot end. I
set the gauge on the bass string with the small foot protruding over the plain
wire in front of the front bridge pin. Then turn the screw down till it
touches plain wire. Now it cam be used as usual to determine positive or
negative bearing. If positive it will tap. If negative a gap should
be visible under the long front foot near the pin</DIV>
<DIV> Dale</DIV>
<BLOCKQUOTE
style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: blue 2px solid"><FONT
style="BACKGROUND-COLOR: transparent" face=Arial color=#000000 size=2>
<DIV><FONT face=Arial size=2>Hi Dale,</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Here is my gauge. I use it as a visual for
customers or salesman to explain down bearing. I also use it for a reading of
fluctuation due to humidity changes.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Jack
Houweling</FONT></DIV></FONT></BLOCKQUOTE></DIV>
<DIV></DIV>
<DIV> </DIV></FONT></BODY></HTML>