<html> <head> <META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=us-ascii"> <meta name=Generator content="Microsoft Word 10 (filtered)"> <style>  </style> </head> <body lang=EN-US link=blue vlink=purple> <div class=Section1> There are devices to hold the string while you insert it through but you can also just use a long dowel with a slot cut in the end where you can insert the string then feed it through from the top (action removal may be required).   <div> David Love davidlovepianos@comcast.net www.davidlovepianos.com </div> -----Original Message----- From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org] On Behalf Of Michelle Smith Sent: Monday, July 10, 2006 1:21 PM To: 'Pianotech List' Subject: String replacement under overstrung area   Hi everyone.  I was tuning my mom’s ancient upright (1908) and of course a string broke.  Even worse, it was D#4 and in the area where the strings overlap.  While this was great stringing practice, I have to believe there’s a trick to getting the string where it needs to go (and stay there) without hours of heartache and assistance from my dad!  I felt like I was torturing this poor old piano.  Any words of wisdom?   Michelle Smith Bastrop, Texas     </div> </body> </html>