<HTML> <HEAD> <META content="text/html; charset=iso-8859-1" http-equiv=Content-Type> <META content="OPENWEBMAIL" name=GENERATOR> </HEAD> <BODY bgColor=#ffffff> I use a safety pin! I clip a large safety pin through the loop of the string and then around an adjacent string. Then just push it from pin to hitch, remove the pin and place it on the hitch pin. Takes away all the aggravation. Joey Recker ---------- Original Message ----------- From: "Michelle Smith" <michelle@cdaustin.com> To: "'Pianotech List'" <pianotech@ptg.org> Sent: Mon, 10 Jul 2006 15:20:46 -0500 Subject: String replacement under overstrung area > Hi everyone. I was tuning my mom’s ancient upright (1908) and of course a string broke. Even worse, it was D#4 and in the area where the strings overlap. While this was great stringing practice, I have to believe there’s a trick to getting the string where it needs to go (and stay there) without hours of heartache and assistance from my dad! I felt like I was torturing this poor old piano. Any words of wisdom? > > Michelle Smith > <place w:st="on"><city w:st="on">Bastrop</city>, <state w:st="on">Texas</state></place> > > ------- End of Original Message ------- </BODY> </HTML> ----------------------------------------- Help protect your family and your marriage! Take a look at PROTECTED internet service from American Family Online - <a href="http://www.afo.net">http://www.afo.net</a>