<HEAD> <META content="MSHTML 6.00.2900.2912" name=GENERATOR></HEAD> <BODY> <DIV>Mike-</DIV> <DIV>I use the Fujan with the 5 degree head and 5/8" extension, and like it very much.</DIV> <DIV>I carry a small tuning lever that came from Apsco and use it when the Fujan doesn't fit on pin #1.</DIV> <DIV>On many pianos the desk support comes off quickly with 2 or 3 screws, which offers another option.</DIV> <DIV>Ed Sutton<BR><BR><BR></DIV> <BLOCKQUOTE style="PADDING-LEFT: 5px; MARGIN-LEFT: 0px; BORDER-LEFT: #0000ff 2px solid">-----Original Message----- <BR>From: Mike Kurta <MKURTA@ADELPHIA.NET><BR>Sent: Jul 14, 2006 2:31 PM <BR>To: Pianotech List <PIANOTECH@PTG.ORG><BR>Subject: Re: Fujan lever addendum <BR><BR><ZZZHTML><ZZZHEAD><ZZZMETA content="text/html; charset=iso-8859-1" http-equiv="Content-Type"><ZZZMETA content="MSHTML 6.00.2900.2912" name="GENERATOR"> <STYLE></STYLE> </ZZZHEAD><ZZZBODY bgColor="#ffffff"> <DIV><FONT face=Tahoma size=2>    John:</FONT></DIV> <DIV><FONT face=Tahoma size=2>    I'm ready to order a Fujan lever, would an alternative to the 15 degree head be the 16226 Apsco tool listed on page 4 or their most recent catalog?  It is a No. 2 extension tip which I have and use now.  BTW, it is very handy for tight places and can be made up by welding  a tuning pin to a #2 tip and machining or grinding the tip to a more slender diameter.  By chance perhaps Schaff would carry it.</FONT></DIV> <DIV><FONT face=Tahoma size=2>    Mike Kurta</FONT></DIV></ZZZBODY></ZZZHTML></BLOCKQUOTE></BODY>