<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=Content-Type content="text/html; charset=iso-8859-1"> <META content="MSHTML 6.00.2900.2912" name=GENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=#ffffff> <DIV><FONT face=Arial size=2>List,</FONT></DIV> <DIV><FONT face=Arial size=2>Replacing a back action with new Renner parts on 1918 SS-M. </FONT></DIV> <DIV><FONT face=Arial size=2>Curious if red oak would do well as replacement mounting blocks for the damper tray rather than maple? (I am a long distance from a hardwood store) The existing was bad as one side was pine and egg shaped in the pin hole - the other side still original maple but suffering from the effects of the age and excess tray wobble.</FONT></DIV> <DIV><FONT face=Arial size=2>Also, how much friction on the lift lever flanges? The Renner parts are about 4.5 to 5 grams from the factory - they are a bit tight in my opinion - should I try for about 2 to 3 grams? I am curious because the 4.5 gram is consistant for the entire set with very slight variation. </FONT></DIV> <DIV><FONT face=Arial size=2>When is a Steinway not a Steinway? When it is rebuilt in _oland.</FONT></DIV> <DIV> </DIV> <DIV><FONT face=Arial size=2>Regards,</FONT></DIV> <DIV><FONT face=Arial size=2>Gene Nelson</FONT></DIV></BODY></HTML>