<HTML style="FONT-SIZE: x-small; FONT-FAMILY: MS Sans Serif"><HEAD> <META http-equiv=Content-Type content="text/html; charset=windows-1251"> <META content="MSHTML 6.00.2900.2963" name=GENERATOR></HEAD> <BODY> <P> <DIV>I've got a gallon of MacLac. I've got a set of Ronsen Wurzens that need something in the low bass...and some of the treble is weak. For the bass, should I soak the bottom hammers with a 6 to 1 solution are just the shoulders? How about the treble?</DIV> <DIV> </DIV> <DIV>I would strongly suggest using Sanding Sealer. The lowest Bass needs a bit on the crown. Same with the last treble hammers. YMMV, but that's what I've found to be the "solution". BTW, I usually thin to a 10:1 ratio. IMO, anything less is way too "lacquery". Because of the Rice Solids in Sanding Sealer, you can still needle w/o getting a hernia.<G></DIV> <DIV>Regards,</DIV> <DIV>Joseph Garrett, R.P.T.</DIV> <DIV>Captain, Tool Police</DIV> <DIV>Squares R I</DIV> <DIV> </DIV> <P></P></BODY></HTML>