<html> <body> At 07:01 AM 9/30/2006, you wrote: <blockquote type=cite class=cite cite=""> Ric,   By trial and error, I found out where the problem is: right at the front bridge pin.  Making it "get out, and stay out!" is the problem.    Dave Stahl </blockquote> Hi Dave,                Now is decision time :-\   Live with it, or take the string off, check the notch, and CA the offending pin.   I would go one step further.  Remove the pin swab the hole with West Systems Epoxy and install a new pin. Don't be surprised if you see some of the Epoxy ooze up the side of an adjacent pin. If the notch needs some attention, I dress it up with a thin wood carvers chisel before inserting the pin. If you remove the pin inspect it carefully under a bright light for blemishes, you may be surprised as what you see. Have a nice day. Roger</body> </html>