<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=us-ascii"> <TITLE>Message</TITLE> <META content="MSHTML 6.00.2900.2995" name=GENERATOR></HEAD> <BODY> <DIV><FONT face=Arial color=#0000ff size=4>Yesterday I was inspecting a Baldwin Grand which had very loose keys. The first thought I had was the key bushings were shot. When I pulled the action and removed the first key to look at its bushings I noticed that there were about 10 key bushing inserts laying on the key bed. I have seen them in the Schaff catalog (page 84, 521 and 521A) and wondered if they were worth using. I put them back in the mortises and put a dab of glue on each one in hopes that this would cure the problem of them falling out. My question is; has anyone had any experience with these bushing inserts? If this is the norm  for these type bushings I don't think I would want to use them in the future. </FONT></DIV> <DIV><FONT face=Arial color=#0000ff size=4></FONT> </DIV> <DIV><FONT face=Arial color=#0000ff size=4>Ron Boyd, Milwaukee, Wi. </FONT></DIV> <DIV><FONT face=Arial color=#0000ff size=4>Associate member chapter #532</FONT></DIV> <DIV><BR><BR><BR></DIV></BODY></HTML>