<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=Content-Type content="text/html; charset=US-ASCII"> <META content="MSHTML 6.00.5730.11" name=GENERATOR></HEAD> <BODY id=role_body style="FONT-SIZE: 10pt; COLOR: #000000; FONT-FAMILY: Arial" bottomMargin=7 leftMargin=7 topMargin=7 rightMargin=7><FONT id=role_document face=Arial color=#000000 size=2> <DIV>Hello Dale,</DIV> <DIV> </DIV> <DIV>   The  Brinsmead  does have a tuning system in</DIV> <DIV>principal  like Mason Screw Stringer. However</DIV> <DIV>that is where the similarity ends.</DIV> <DIV> </DIV> <DIV>  In a  Brinsmead  the string go in to the end of the</DIV> <DIV>screw  and comes out the side about half way up.</DIV> <DIV>It then laps over the top end  (in a groove) and </DIV> <DIV>comes down the other side. A smooth cap then </DIV> <DIV>covers the screw head and the string. </DIV> <DIV>  </DIV> <DIV>  The cap comes off and the square screw head  </DIV> <DIV>can be tuned. The size of the screw head is 10 mm.</DIV> <DIV> </DIV> <DIV> The  Brinsmead like the  Mason carries its own </DIV> <DIV>special tuning lever.  Don't lose that lever</DIV> <DIV> </DIV> <DIV> I had to have one made</DIV> <DIV> </DIV> <DIV>Good luck and enjoy,</DIV> <DIV> </DIV> <DIV>Jack Wyatt</DIV> <DIV> </DIV> <DIV> </DIV> <DIV> </DIV> <DIV> </DIV> <DIV> </DIV> <DIV> </DIV> <DIV> </DIV> <DIV> </DIV> <DIV> </DIV> <DIV> </DIV> <DIV> </DIV> <DIV> </DIV> <DIV> </DIV> <DIV> </DIV> <DIV> </DIV> <DIV> </DIV> <DIV> </DIV> <DIV> </DIV> <DIV> </DIV> <DIV> </DIV> <DIV> </DIV> <DIV> </DIV> <DIV> </DIV> <DIV>stringer </DIV></FONT></BODY></HTML>