<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=Content-Type content="text/html; charset=US-ASCII"> <META content="MSHTML 6.00.2900.3020" name=GENERATOR></HEAD> <BODY id=role_body style="FONT-SIZE: 10pt; COLOR: #000000; FONT-FAMILY: Arial" bottomMargin=7 leftMargin=7 topMargin=7 rightMargin=7><FONT id=role_document face=Arial color=#000000 size=2> <DIV>Thanx, Patrick, I'll see if I can find that Phillips screwdriver you mentioned.  While attending the first Steinway Academy Seminar a couple of years ago, one of their engineers told me they were aware of the problem and were open to suggestions.  I'm thinking of a stamped metal tool similar to the punching lifter (tweezer) seen in Schaff catalogues.  The bottom slotted to fit the screw and the top with an indentation for the screw head that would have ridges to fit into the phillips head slots.</DIV> <DIV> </DIV> <DIV>I haven't worked with metal, but shouldn't at tool be able to stamped like that?</DIV> <DIV>I'll email this to the Steinway engineers to see if they think it might work.</DIV> <DIV> </DIV> <DIV>Bruce P</DIV></FONT></BODY></HTML>