<html>
<body>
<font size=3>But he just said he was "driving" the pins. Not
that was putting new<br>
ones in! So I assume those were the pins that Samick put in there! <br>
But I agree they're way too long! <br><br>
Avery Todd<br><br>
At 08:23 AM 2/4/2007, you wrote:<br>
<blockquote type=cite class=cite cite="">Terry's diagnosis is spot on, as
is his advice regarding jacks. The<br>
little jack is OK if you use it (preferably a pair of jacks) to push<br>
up a solid piece of wood against the pinblock.<br>
Dan, if this isn't your own piano, I'm afraid that not only do you<br>
need to use a shorter tuning pin, but you owe your customer a new<br>
pinblock as well.<br>
Patrick Draine<br><br>
On 2/4/07, Farrell <mfarrel2@tampabay.rr.com> wrote:<br>
<blockquote type=cite class=cite cite=""><br><br>
Your tuning pins are too long. The bottoms should not protrude below
the<br>
bottom of the pinblock.</font></blockquote></blockquote></body>
</html>