<html>
Terry,<br><br>
My bit is also approx 2 mm at the tip. I don't think that yours is
broken.<br><br>
Terry Beckingham RPT<br><br>
At 04:58 PM 2/14/2007 -0500, you wrote:<br>
<blockquote type=cite class=cite cite><font face="arial" size=2>I'm
looking for a reality check regarding the Spurlock Soundboard Repair bit
(the 20-degree angle bit for cutting into the soundboard panel for a
repair shim).</font><br>
<br>
<font face="arial" size=2>My bit (which I haven't used for a couple
years) has a flat tip that is exactly two millimeters wide. I thought it
came something closer to a point rather than such a wide flat tip. Does
anyone else out there have one of these bits who would be willing to
measure the tip width.</font><br>
<br>
<font face="arial" size=2>Basically, I want a bit that has more of a
point - I don't know if I've broken the tip off mine, or that was how it
was new.</font><br>
<br>
<font face="arial" size=2>Thanks.</font><br>
<br>
<font face="arial" size=2>Terry Farrell<br>
Farrell Piano</font><br>
<br>
<font face="arial" size=2><a href="http://www.farrellpiano.com">www.farrellpiano.com</a><br>
<a href="mailto:terry@farrellpiano.com">terry@farrellpiano.com</a></font></blockquote><br>
</html>