<html> <body> At 09:39 PM 2/15/2007, you wrote: <blockquote type=cite class=cite cite=""> Maybe your G was flat ?? Marcel Carey <dl> <dd>-----Message d'origine----- <dd>De : pianotech-bounces@ptg.org [<a href="mailto:pianotech-bounces@ptg.org" eudora="autourl"> mailto:pianotech-bounces@ptg.org</a>] De la part de pianotune05@comcast.net <dd>Envoyé : 15 février 2007 21:48 <dd>À : pianotech@ptg.org <dd>Objet : muting etc. <dd>Hi Everyone, <dd>I tuned a piano today that I found difficult to keep the felt from coming out when I strip muted it.  The space between the outside of the strings and the plate was too shallow.  What do you guys do in that situation?  </blockquote> </dl> Move it further back towards the tail to get it away from that! Duh! Avery <blockquote type=cite class=cite cite=""> <dl> <dd>  <dd>As for ETDs.  I recall someone designing one for the vision impaired.  Is this ready to check out?  Will it be on display at the convention?  <dd>  <dd>Does anyone here go from left string to middle to right when tuning rather than strip muting?  I do this in the area close to the trebble where the dampers are too close so as not to mangle them.  <dd>  <dd>I also had a strange occurance todaya while tuning.  When I made the  d#3 d# octave pure the d#g was beating too slow.  When I corrected this, the octave was way off.  Any ideas?  <dd>Thanks. <dd>Marshall </dl></blockquote></body> </html>