<HTML><BODY>
<div>Paul B.,</div>
<div> </div>
<div>I'll second all of Paul M's suggestions. You'll never get any letoff if you don't have enough drop. If you have an action model available, you could try all of the recommendations Mr. McCloud listed below without being on the spot. <SPAN contentEditable=false style="DISPLAY: inline-block"></SPAN></div>
<div> </div>
<div>This is one of those times when I wish I could see the situation rather than read about it.</div>
<div> </div>
<div>I think blow distance and drop are your keys here. Good luck, and let us know how it turns out. </div>
<div> </div>
<div style="CLEAR: both">Dave Stahl<br>
<br>
Dave Stahl Piano Service<br>
650-224-3560<br>
dstahlpiano@sbcglobal.net<br>
http://dstahlpiano.net/<br>
<br>
<br>
<br>
</div>
<div> </div>
<br>
-----Original Message-----<br>
From: pmc033@earthlink.net<br>
To: pianotech@ptg.org<br>
Sent: Fri, 23 Feb 2007 7:00 PM<br>
Subject: RE: Speaking of Falcone...<br>
<br>
<STYLE>
.AOLPlainTextBody {
margin: 0px;
font-family: Tahoma, Verdana, Arial, Sans-Serif;
font-size: 12px;
color: #000;
background-color: #fff;
}
.AOLPlainTextBody pre {
font-size: 9pt;
}
.AOLInlineAttachment {
margin: 10px;
}
.AOLAttachmentHeader {
font: 11px arial;
border: 1px solid #7DA8D4;
background: #F9F9F9;
}
.AOLAttachmentHeader .Title {
font: 11px arial;
background: #B5DDFA;
padding: 3px 3px 3px 3px;
}
.AOLAttachmentHeader .FieldLabel {
font: 11px arial;
color: #000000;
padding: 1px 10px 1px 9px;
background: #F9F9F9;
}
.AOLAttachmentHeader .FieldValue {
font: 11px arial;
color: #000000;
background: #F9F9F9;
}
.AOLAttachmentHeader a, .AOLImage a {
color: #2864B4;
text-decoration: none;
}
.AOLAttachmentHeader a:hover, .AOLImage a:hover {
color: #2864B4;
text-decoration: underline;
}
.AOLWebSuiteCompose .AOLPicturesFullSizeLink,
.AOLWebSuite .AOLPicturesFullSizeLink {
height: 1px;
width: 1px;
overflow: hidden;
}
body {
background-color: white;
font-family: "Verdana";
font-size: 10pt;
border: 0px;
}
.AOLWebSuiteCompose p {
margin: 0px;
padding: 0px;
}
img.managedImg {
width: 0px;
height: 0px;
}
img.placeholder {
width: 275px;
height: 206px;
background: #F4F4F4 center center no-repeat;
border: 1px solid #DADAD6 !important;
}
</STYLE>
<div id=AOLMsgPart_2_360020f4-1a26-4fd0-bf00-0c756f854123>
<div>
<div><FONT face="MS Sans Serif" size=2>Hi, Paul:</FONT></div>
<div> <FONT face="MS Sans Serif" size=2>It is normal to have the sharp keys slightly higher than the naturals at the balance rail.</FONT></div>
<div> <FONT face="MS Sans Serif" size=2>Remove the action and see where the jacks end up when the key is fully depressed. Watch and see what the jack is doing as you press the key. Does it clear the knuckle? Does it push on the felt in the wippen? Are the jacks lined up with the knuckle core at rest? Observing the jack position will indicate many things, like too much dip for the hammer blow distance (makes the jack hit the wippen cushion), too little dip or too much blow distance (jack won't clear the knuckle), uneven hammer-line (balancier height too high, jack is too low in wippen window), non-repeating keys (jack is too high in window). </FONT></div>
<div> <FONT face="MS Sans Serif" size=2>Did you try adjusting the drop screw(s)? Screw it downwards to get more drop. Are the repetition springs too tight (play the note into check, and slowly let the key up. Does it want to jump up too fast?)</FONT></div>
<div> <FONT face="MS Sans Serif" size=2>Did you measure anything, like dip, hammer blow, etc.? We need more info to try to help here.</FONT></div>
<div> <FONT face="MS Sans Serif" size=2>Let us know as much as you can find out next time you go there. We'll get it figured out.</FONT></div>
<div><FONT face="MS Sans Serif" size=2></FONT> </div>
<div> <FONT face="MS Sans Serif" size=2>Best,</FONT></div>
<div> <FONT face="MS Sans Serif" size=2>Paul McCloud</FONT></div>
<div> <FONT face="MS Sans Serif" size=2>San Diego</FONT></div>
<div> </div>
<div></div>
</div>
<div> </div>
<BLOCKQUOTE style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid">
<div style="FONT: 10pt Arial">----- Original Message ----- </div>
<div style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B> <A title=tunergeek@gmail.com href="mailto:tunergeek@gmail.com">paul bruesch</A> </div>
<div style="FONT: 10pt arial"><B>To: </B><A title=pianotech@ptg.org href="mailto:pianotech@ptg.org">Pianotech List</A></div>
<div style="FONT: 10pt arial"><B>Sent:</B> 02/23/2007 3:03:10 PM </div>
<div style="FONT: 10pt arial"><B>Subject:</B> Speaking of Falcone...</div>
<div><br>
</div>
<FONT size=2>I was marginally successful at tuning a 2+ yr-old Falcone GF-62. I say marginally because the white keys of about the middle three octaves or so all bobbled on the strings. No letoff, no drop. Tried to adjust letoff/drop to no avail. Pulled the action. Hammers are properly slightly off the rail in the back. Just for giggles tried removing the felt front-rail punching to give it more aftertouch. Still no letoff, no drop. Had to get going to next appt and didn't have punchings with me anyway, but observed that the white keys were not as high at the center rail... like this: <br>
<br>
<SPAN style="FONT-FAMILY: courier new,monospace"> _ _ - _ - _ _ - _ - _ - _ _ - _ - _ _ - _ - _ - _ _ -</SPAN><br>
<br>
<br>
Do other listers have any ideas? Would adding CR punchings possibly/probably help? The church is near-desperate for this PSO to be tip-top by Palm Sunday! <br>
<br>
Thanks!<br>
Paul<br>
</FONT></BLOCKQUOTE></div>
<!-- end of AOLMsgPart_2_360020f4-1a26-4fd0-bf00-0c756f854123 -->
<div class="AOLPromoFooter">
<hr style="margin-top:10px;" />
<a href="http://pr.atwola.com/promoclk/1615326657x4311227241x4298082137/aol?redir=http%3A%2F%2Fwww%2Eaol%2Ecom%2Fnewaol" target="_blank"><b>Check out the new AOL</b></a>. Most comprehensive set of free safety and security tools, free access to millions of high-quality videos from across the web, free AOL Mail and more.<br />
</div>
</BODY></HTML>