<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2900.3059" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY
style="FONT-SIZE: x-small; COLOR: black; FONT-FAMILY: Arial; BACKGROUND-COLOR: transparent"
bgColor=#ffffff>
<DIV>Ahhhhhh. Excellent! Thank you. I'd feel guilty putting you through all that
grinding - I'll just take care of it myself. Thanks again.</DIV>
<DIV> </DIV>
<DIV>Terry Farrell</DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV><FONT face="Bookman Old Style">Good News!!</FONT></DIV>
<DIV><FONT face="Bookman Old Style"></FONT> </DIV>
<DIV><FONT face="Bookman Old Style">You can send your "dead" chisel to me,
I'll pay shipping. ;-]</FONT></DIV>
<DIV><FONT face="Bookman Old Style"></FONT> </DIV>
<DIV><FONT face="Bookman Old Style">It won't be dead. You can extend the
life by lapping the backside of the chisel aggressively, thereby moving the
hollow back up the blade a bit. See this article on the Japan Woodworker
site, paragraph 2:</FONT></DIV>
<DIV><FONT face="Bookman Old Style"></FONT> </DIV>
<DIV><FONT face="Bookman Old Style"><A
href="http://japanwoodworker.com/page.asp?content_id=2744">http://japanwoodworker.com/page.asp?content_id=2744</A></FONT></DIV>
<DIV><FONT face="Bookman Old Style"></FONT> </DIV>
<DIV><FONT face="Bookman Old Style">Of course, if you'd rather not bother with
all that fuss, you can still send it to me. ;-]</FONT></DIV>
<DIV><FONT face="Bookman Old Style"></FONT> </DIV>
<DIV><FONT face="Bookman Old Style">William R. Monroe</FONT></DIV>
<DIV><FONT face="Bookman Old Style"></FONT> </DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">Something that has been troubling me ever
since I bought my Japanese chisel: Starting just a few millimeters back from
the sharpened edge, the entire backside has a hollow ground out. Why? Is
that to make flattening the backside easier? After many sharpenings, the
edge of my chisel is getting very close to the beginning of that hollow. Of
course, as soon as the edge gets right up to the hollow, the chisel dies. Is
this just a feature to sell more chisels?</DIV>
<DIV> </DIV>
<DIV>Terry Farrell</DIV></BLOCKQUOTE></BLOCKQUOTE></BODY></HTML>