<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD><TITLE></TITLE> <META http-equiv=Content-Type content=text/html;charset=ISO-8859-1> <META content="MSHTML 6.00.2800.1586" name=GENERATOR> <STYLE></STYLE> </HEAD> <BODY text=#000000 bgColor=#ffffff> <DIV><FONT size=2>Hey Guys,</FONT></DIV> <DIV><FONT size=2>I'm way behind on looking at these posts so maybe this has been addressed. Kick back is the real killer with table saws, blade contact injuries are not as common. 2 things you have to have right, and a couple more safety issues and kick back risk is much less. This is easy stuff. 1. Blade parallel to fence. 2. Splitter in line with blade. Done, good to go. Now don't stand in line with blade, feed stock in a direction pointing towards the stock's contact with the fence adjacent to the blade. Let's add a sharp blade, with height set so gullets clear the stock. There is a complex rotational force placed on the stock as it passes the blade, the back of the blade picks it up and throws it at you at 120 mph. Not good. The splitter all but eliminates this from happening.</FONT></DIV> <DIV><FONT size=2>Fenton</FONT></DIV> <BLOCKQUOTE dir=ltr style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px"> <DIV style="FONT: 10pt arial">----- Original Message ----- </DIV> <DIV style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B> <A title=pianotech@a440piano.net href="mailto:pianotech@a440piano.net">William R. Monroe</A> </DIV> <DIV style="FONT: 10pt arial"><B>To:</B> <A title=pianotech@ptg.org href="mailto:pianotech@ptg.org">Pianotech List</A> </DIV> <DIV style="FONT: 10pt arial"><B>Sent:</B> Friday, March 30, 2007 7:27 PM</DIV> <DIV style="FONT: 10pt arial"><B>Subject:</B> Re: Ultimate Table Saw</DIV> <DIV><BR></DIV> <DIV><FONT face="Bookman Old Style" size=2>Hi Terry,</FONT></DIV> <DIV><FONT face="Bookman Old Style" size=2></FONT> </DIV> <DIV><FONT face="Bookman Old Style" size=2>You sound like me about 10 years ago.  I was scared to death of a table saw, too.  I would suggest, however that they are really no different than any large shop implement.  You need to use them properly, with care and respect always, and risk is then minimized.  I'd say if you're getting kickback that frequently, there is something wrong with the saw set-up, your techniques, or both.  If used within their limitations, they are a powerful ally in the shop.  It's not that you can't do most (or all) of the tasks a table saw does with another type of saw - some operations are simply easier or more accurate on the table saw.</FONT></DIV> <DIV><FONT face="Bookman Old Style" size=2></FONT> </DIV> <DIV><FONT face="Bookman Old Style" size=2>William R. Monroe</FONT></DIV> <DIV> </DIV> <BLOCKQUOTE dir=ltr style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px"> <DIV><FONT face=Verdana>Is there anything we do with pianos on a table saw that a band saw and a router can't (and maybe a hand-held circular saw for plywood and a good hand saw for cutting off large dimension lumber)? I have a Shopsmith, a table saw being the main feature, but I use it mostly for buffing and drilling (horizontal) - I can't remember when I last used it as a table saw.</FONT></DIV> <DIV><FONT face=Verdana></FONT> </DIV> <DIV><FONT face=Verdana>Table saws scare the heck out of me (or maybe it's the combination of me & a table saw). I've had things kick back so darn hard at me - I simply avoid its use at all costs. I'll be the first to admit, perhaps I just don't know how to use a table saw correctly - but I'll also suggest that there are a lot of folks using table saws that haven't had any more professional woodworking training than I have had (hmmm, could common sense be a factor here?).</FONT></DIV> <DIV><FONT face=Verdana></FONT> </DIV> <DIV><FONT face=Verdana>So many of the things commonly done on a table saw can be done with a bandsaw. William Monroe suggested: "Ask Terry Farrell about his bandsaw (in case you haven't read enough already ;-}  )." </FONT></DIV> <DIV><FONT face=Verdana></FONT> </DIV> <DIV><FONT face=Verdana>Cool suggestion. Anyone want to hear about my bandsaw??? <FONT size=5> ;-)</FONT><BR></DIV></FONT> <DIV><FONT face=Verdana>Terry Farrell</FONT></DIV> <BLOCKQUOTE dir=ltr style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px"> <DIV style="FONT: 10pt arial">----- Original Message ----- </DIV> <DIV style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"> </DIV><FONT size=+1>It's taken a good part of my career to figure out that I need to have the best tools possible if I want to do high level work. I'll never forget Laroy Edwards telling me that if you have the right tool, the customer pays for it. If you don't have the right tool, <B><I>you</I></B> pay for it. <BR><BR>Ironically, he himself was a victim of a table saw blade =8-O (long before SawStop).<BR><BR>Tom Cole</FONT></BLOCKQUOTE></BLOCKQUOTE></BLOCKQUOTE></BODY></HTML>