Jon,<br>
<br>
How long does this procedure take you? I've used Tom's method often, and that goes pretty quickly, but you're adding a few steps. <br>
<br>
Thanks,<br>
<br>
<div style="CLEAR: both">Dave Stahl<br>
</div>
<br>
<br>
-----Original Message-----<br>
From: Jon Page <jonpage@comcast.net><br>
To: pianotech@ptg.org<br>
Sent: Thu, 28 Jun 2007 8:09 pm<br>
Subject: Yamaha Spring Tension<br>
<br>
<div id=AOLMsgPart_2_4a53a13a-6248-40e5-a4d6-7efed4081cd8>
<STYLE type=text/css>#AOLMsgPart_2_4a53a13a-6248-40e5-a4d6-7efed4081cd8 <!-- blockquote, dl, ul, ol, li { padding-top: 0 ; padding-bottom: 0 } --></STYLE>
<div>><FONT face=Arial color=#000000>40 grams measured at the spring is roughly</FONT></div>
<div><FONT face=Arial color=#000000>>equivalent to 20 grams measured at the flange.</FONT></div>
<div><br>
</div>
<div>Thanks Frank, that's what I'm getting when I open the spring</div>
<div>so as to have the arms in line at 180 degrees (the resulting</div>
<div>angle is around 130 degrees) and attach to the loop.</div>
<div><br>
</div>
<div>I'll enter this info into my Action Handbook in the Yamaha section</div>
<div>along with 44mm cord length which is achieved by wrapping the</div>
<div>cord around a 9/16" dowel and slicing along the length of the dowel.</div>
<div>Glueing cord ends onto the flange 10mm on each side of the yoke.</div>
<div><br>
</div>
<div>I remove the hammers/flanges from the rail, number each and separate.</div>
<div>This way I can file the hammers on the oscillating spindle sander and</div>
<div>decide if repinning is in order. Secure the flanges in a vise to clean the</div>
<div>flange grooves and install the new cord. Assemble units, open spring, hook.</div>
<div><br>
</div>
<div>I might even opt to taper the hammers slightly. RIght side in the bass,</div>
<div>left side in the tenor and both sides in the treble.</div>
<div><br>
</div>
<div>Tom Cole's procedure is here (see photo at end):</div>
<div><FONT face=Arial color=#000000 size=-4><A href="https://www.moypiano.com/ptg/pianotech.php/2006-December/198869.html" target=_blank>https://www.moypiano.com/ptg/pianotech.php/2006-December/198869.html</A></FONT></div>
<PRE>--
</PRE>
<div><br>
Regards,<br>
<br>
Jon Page</div>
</div>
<!-- end of AOLMsgPart_2_4a53a13a-6248-40e5-a4d6-7efed4081cd8 --><div class="AOLPromoFooter">
<hr style="margin-top:10px;" />
AOL now offers free email to everyone. Find out more about what's free from AOL at <a href="http://www.aol.com?ncid=AOLAOF00020000000437" target="_blank"><b>AOL.com</b></a>.<br />
</div>