<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
Webb's Wood Rebuilder (Allied Piano) works amazingly well also. Fill
the hole with rebuilder, coat the plate screw with Protec, Vaseline etc
and insert it into the hole while the rebuilder is still soft, it makes
a custom threaded hole. Very strong.<br>
<br>
Mike<br>
<br>
Mike Kurta wrote:
<blockquote cite="mid01c301c7bce8$8ac35480$650fa8c0@HPa600N" type="cite">
<meta http-equiv="Content-Type" content="text/html; ">
<meta content="MSHTML 6.00.2900.3086" name="GENERATOR">
<style></style>
<div><font face="Tahoma" size="2">Brian, you'll get a lot of answers
to your question, but I'll put my entry in here. Unwind the copper
from a heavy bass string, keeping the coils close together resembling a
spring. Cut to length, and place them down in the hole all the way.
Use as many as necessary, 2 or 3 should do it. (You ARE going into
wood?) Put the screw back in and tighten 'er up. It acts like a
Heli-coil in metal and will really hold if done properly. I have
reattached grand legs with stripped holes this way. </font></div>
<div><font face="Tahoma" size="2"> Mike Kurta</font></div>
<pre wrap="">
<hr size="4" width="90%">
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.476 / Virus Database: 269.9.14/884 - Release Date: 7/2/2007 3:35 PM
</pre>
</blockquote>
</body>
</html>