<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2900.3132" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>I hadn't seen this before and was wondering if
anyone converts those hard-to-get-at let-off rails on some grand actions (like
on an upright - but the loop screw top that you adjust is jammed right under the
hammer rail) to a modern Yamaha-type arrangement.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>This is the 1890s Knabe action that I've been
working on lately. The adjustment screws in the old let-off rail were
corroded/frozen in place, so I would have had to have made new rails
anyway. This conversion wasn't very difficult - just the one little strip of
maple was added to the bottom of the hammer rail. The only challenge was
measuring to be sure to locate the row of let-off dowels so that they were
centered on the jack foot (toe?) at mid-adjustment at let-off. I measured
everything about 25 times and seem to have pretty much hit it on the button (pun
intended).</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><IMG alt="" hspace=0 src="cid:000a01c7c8d1$f0286e10$0302a8c0@DESKTOP"
align=baseline border=0></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><IMG alt="" hspace=0 src="cid:000b01c7c8d1$f02ab800$0302a8c0@DESKTOP"
align=baseline border=0></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Only downside I can see is that when comes time to
regulate, I won't have the opportunity to further develop my four-letter-word
vocabulary..... :-(</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Terry Farrell<BR>Farrell Piano</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=Arial size=2><A
href="http://www.farrellpiano.com">www.farrellpiano.com</A><BR><A
href="mailto:terry@farrellpiano.com">terry@farrellpiano.com</A></FONT></DIV></BODY></HTML>