<html> <body> David - I also don't remember the name, however, if it's the same one I saw a few years ago, with a flexible hose attachment,  I tried it and returned it.  The delivery pattern was too diffuse, and the temperature of what came out was quite low.  Seemed for of a mister than a steamer. David Skolnik At 01:58 AM 7/19/2007, you wrote: <blockquote type=cite class=cite cite="">I have a “travel”-type garment steamer I got in the early 80’s, at some big box store, that works pretty well for steaming off ivories, rebushing keys, etc.  It’s not fantastic, but gets the job done.  There’s an infomercial for one on TV that looks even better, but I can’t remember the name.  It’s not only for garments, but cleaning bathroom tile grout, etc.  I can’t remember if it looked suitable for steaming hammers (for voicing).  Anybody else seen the infomercial?             --David Nereson, RPT      -----Original Message----- From: pianotech-bounces@ptg.org [<a href="mailto:pianotech-bounces@ptg.org" eudora="autourl"> mailto:pianotech-bounces@ptg.org</a>]On Behalf Of reggaepass@aol.com Sent: Wednesday, July 18, 2007 7:39 AM To: pianotech@ptg.org Subject: steamer   Hi List, I would like to use steam on an upcoming key bushing job, but have not been able to find any of the handy devices my colleagues have online.  Any suggestions for an off-the-shelf, hold-it-in-your-hand gizmo capable of producing a fine, steady stream of steam? Thanks, Alan Eder P. S. This is a second attempt to send this to the list  Apologies if redundancy occurs. ae       <hr> <div align="center"></div> AOL now offers free email to everyone. Find out more about what's free from AOL at <a href="http://www.aol.com?ncid=AOLAOF00020000000437">AOL.com</a> .</blockquote></body> </html>