<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=Content-Type content="text/html; charset=iso-8859-1"> <META content="MSHTML 6.00.2900.3132" name=GENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=#ffffff> <DIV><FONT face=Arial>I would suggest that CA may not be a good candidate for this repair. The cap was off the bridge root. The strings apply a sideways pressure to the pins and in turn the cap. I have observed CA glue to have little shear strength - if fact, that is one of the things I like about CA use for temporary jigs in the shop - you can just whack them apart easily. CA may be fine for filling a gap here and there, but I would fear repair failure using CA in this particular case.</FONT></DIV> <DIV><FONT face=Arial></FONT> </DIV> <DIV><FONT face=Arial>Terry Farrell</FONT></DIV> <BLOCKQUOTE dir=ltr style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px"> <DIV style="FONT: 10pt arial">----- Original Message ----- </DIV> <DIV style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>SNIP</B></DIV> <DIV><FONT face=Arial size=2>Also using extra thin CA as a first pass and thick on the second would be my choice as the result for me is a little neater. The thin to sort of tack the pins where you want them to end up, and the thick or medium to fill the gaps.</FONT></DIV> <DIV>Joe Goss RPT<BR>Mother Goose Tools</DIV></BLOCKQUOTE></BODY></HTML>