<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <html> <head> <title>RE: Serious Case of Genckflop</title> <style>  </style> </head> <body>Thanks for the pix. That does look like a nice case. Do you have that website address or the manufacturer's name? Ifs they only want £79 for it, I'll be happy to send them seventy-nine pounds of something; rusty old nails, perhaps. <img src="Cool.gif" /> Alan Barnard Salem, MO ----- Original message ---------------------------------------- From: "David Boyce" <david@piano.plus.com></david@piano.plus.com> To: "Pianotech List" <pianotech@ptg.org></pianotech@ptg.org> Received: 8/26/2007 2:55:37 PM Subject: Serious Case of Genckflop >I bought a new toolcase a few months ago and am delighted with it. My old >black ABS "Engineers toolcase" from RS Components (a UK electronics supply >company) was falling apart with age. I was never all that enamoured of it, >as the elastic didn't hold tools firmly in place. In the end, it got a hole >of increasing size in one corner and tools were droping out! >For ages I looked around to find something reasonable. I bought a cheap >aluminium toolcase and a tool roll that I used for a while, but didn't like >it. Then online I found a company selling cases at reasonable prices, >including this one in (bright!) orage, on special sale offer at £79 ($158) >including delivery. >It's proving to be just the thing! Nice design, with rubber feet on both >the base and the bottom edge. Metal reinforced corners. It holds fine >regulating tools firmly in place in the elastic straps on the tray, and the >tray can be locked in place on the base inset by little buckles. I carry my >Fujan lever in it too, not shown, wrapped carefully in a cloth. >Of course, I also have other cases and holders for action parts, adhesives, >felts, wire, etc! >Best regards, >David. <img src="Cool.gif" /> </body> </html>