<!doctype html public "-//W3C//DTD W3 HTML//EN"> <html><head><style type="text/css"></style><title>Grand's action bracket runs UNDER the key sticks - impossi</title></head><body> <blockquote type="cite" cite><font face="Arial" color="#000000">Cut along the strut edges</font></blockquote> <div><br> <br> </div> <div>This is a good idea but I would drill an index hole in the struts first.</div> <div><br></div> <div>Remove the hammer rail with shanks attached.</div> <div>Remove the let off rail.</div> <div>Remove the wippen rail with wippen attached.</div> <div><br></div> <div>Now you have an open field.  Drill your pilot holes in the brackets, into the key frame.</div> <div>Now you can remove the bracket structure and cut the metal.  The key frame is probably flexible, which was the purpose of the support of the metal; so consider reinforcement.</div> <div><br></div> <div>It's still landfill though.</div> <x-sigsep><pre>-- </pre></x-sigsep> <div><br> Regards,<br> <br> Jon Page</div> </body> </html>