<!doctype html public "-//W3C//DTD W3 HTML//EN"> <html><head><style type="text/css"></style><title>Re Bronzing Powder</title></head><body> <blockquote type="cite" cite><font face="Arial" color="#000000">Or do you just mix to point, where it is not too thick?</font></blockquote> <div><br></div> <div>Mix the powder with a little thinner first and than add it to the lacquer.</div> <div><br></div> <div>As far as the ratio goes, you need enough so that the material offers</div> <div>a solid color and no too translucent but not so many particles in suspension</div> <div>that it clogs the nozzle.</div> <div><br></div> <div>Don't forget to filter it, don't mix it in the cup.</div> <div><br></div> <div>Once you get good coverage, add more clear to the gun and add some dimension.</div> <div>Finish off with clear but do not sand or touch the final gold before clear topcoat.</div> <x-sigsep><pre>-- </pre></x-sigsep> <div><br> Regards,<br> <br> Jon Page</div> </body> </html>