<HEAD> <STYLE>body{font-family: Geneva,Arial,Helvetica,sans-serif;font-size:9pt;background-color: #ffffff;color: black;}</STYLE> <META content="MSHTML 6.00.6000.16525" name=GENERATOR></HEAD> <BODY id=compText> I think it was posted here, about using white vinyl tape on the keystick, then applying CA, then the ivory.  The CA seems to melt the vinyl and sticks everything together nicely, and keeps the translucent keytop white(ish).  I found white vinyl tape in the electrical supply section of major home improvement box store, and have used thin, medium, and thick CA's thereupon - all seem to work well, and without accelerator (it sets fast enough.) Chuck Christus  <BLOCKQUOTE style="PADDING-LEFT: 5px; MARGIN-LEFT: 0px; BORDER-LEFT: #0000ff 2px solid"> <ZZZHTML><ZZZHEAD> <STYLE> .hmmessage P { margin:0px; padding:0px } body.hmmessage { FONT-SIZE: 10pt; FONT-FAMILY:Tahoma } </STYLE> </ZZZHEAD><ZZZBODY class=hmmessage>John,   what is that tianium dioxide? Is it a powder which you mix with the glue? And where do you get it? We tried zinc oxid, but that does not work because it makes the glue unglueable, i.e. the glue does not glue anymore.   I think it realy does not matter which glue one uses, every glue will work. The problem is the white underground or the whiteness of the glue after getting hard. Most glues are getting grey and so the ivory will because the grey shimmers through the ivory.   Gregor > > At 16:26 -0400 28/9/07, Willem Blees wrote: > > >You can use CA glue... > > ></BLOCKQUOTE></BODY>