<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html> <head> <meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type"> <title></title> </head> <body bgcolor="#ffffff" text="#000000"> Roger,     Check your system date and time. I think they're off a bit. all the best, Greg Newell Roger Jolly wrote: <blockquote cite="mid:6.2.0.14.2.20071027001047.00c2af48@mail.sasktel.net" type="cite">Hi James,                  the answer is yes, and it is the most effective way to treat a grand block. Especially if the block is really bad.   Far from my first choice, but in this situation go for it. Regards Roger At 08:50 AM 10/26/2007, you wrote: <blockquote type="cite" class="cite" cite="">I recently tried to treat a grand pinblock with C/A glue and very little of the glue penetrated past the plate bushings.  Needless to say, I didn't get the usually expected result.  Has anyone tried turning a grand upside down and treating the pin block from the bottom?  The pin holes come out the bottom so there would be a well into which the C/A glue could be applied. I'm not sure I want to be the first to try it, but If I don't get a response, I probably will be.  The customer (a piano teacher of course) can't afford a new pinblock and is just a few years from retirement anyway. Thanks, James H. Johnson, RPT </blockquote> </blockquote> </body> </html>