<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.6000.16544" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Hello list,</FONT></DIV>
<DIV><FONT face=Arial size=2>Would anyone care to share their technique for
locating and notching rib ends into the inner rim?</FONT></DIV>
<DIV><FONT face=Arial size=2>My first piano I used two sided tape on the rib
ends and set the board in - the tape stuck to the inner rim and I used this to
cut the notch.</FONT></DIV>
<DIV><FONT face=Arial size=2>This was not as accurate as I would have
liked.</FONT></DIV>
<DIV><FONT face=Arial size=2>Some of the other problems were the shape of the
rib end - being tapered presented some difficulty with this notching - trying to
match the taper was not easy. On the second piano the rib ends are
flat.</FONT></DIV>
<DIV><FONT face=Arial size=2>Also the depth of the notch - should the depth of
notch exactly match rib end hight? Be slightly deeper?</FONT></DIV>
<DIV><FONT face=Arial size=2>How thick or thin should the rib end be? Thinner is
better in my mind. Is there a limit on how thin?</FONT></DIV>
<DIV><FONT face=Arial size=2>Thanks for any insights.</FONT></DIV>
<DIV><FONT face=Arial size=2>Gene</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV></BODY></HTML>