<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.6000.16544" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Tahoma size=2> Hi David:</FONT></DIV>
<DIV><FONT face=Tahoma size=2> I had one of these awhile back
and located and drilled a new hole for a new pin near the original one.
You have a little latitude sideways or above or below, but try to keep the
string in about the same place. Drill a hole, then use a drill bit
the next size larger cut or ground to the proper length and drive
it into the hole just drilled. A little gold paint and "voila."
Good luck!</FONT></DIV>
<DIV><FONT face=Tahoma size=2> Mike
Kurta</FONT></DIV></BODY></HTML>