<div>Oops. Forgot to include the link. Sorry. </div>
<div></div>
<div> </div>
<div>Avery </div>
<div> </div>
<div></div>
<div><a href="https://www.moypiano.com/ptg/pianotech.php/2000-February/059279.html">https://www.moypiano.com/ptg/pianotech.php/2000-February/059279.html</a></div>
<div> </div>
<div></div>
<div></div>
<div></div>
<div></div>
<div>---------- Forwarded message ---------- </div>
<div>From: Avery Todd <<a href="mailto:ptuner1@gmail.com">ptuner1@gmail.com</a>> </div>
<div>Date: Dec 12, 2007 7:45 AM </div>
<div>Subject: Re: [CAUT] Old Knabe </div>
<div>To: College and University Technicians <a href="mailto:caut@ptg.org">caut@ptg.org</a> </div>
<div></div>
<div></div>
<div> </div>
<div>List, </div>
<div></div>
<div>In case anyone else is interested in reading it, here's a link for the </div>
<div>post that Les Smith made around 1988. Susan Klein reposted it in </div>
<div>answer to a question about those dampers. </div>
<div></div>
<div> </div>
<div>Thanks to everyone who's responded to my post. Obviously, since I </div>
<div>can't see my own posts, I can at least see the responses. And I WILL </div>
<div>figure that out. <grin> </div>
<div></div>
<div> </div>
<div>Avery Todd, RPT </div>
<div></div>
<div></div>
<div> </div>
<div>On Dec 11, 2007 6:43 PM, Jon Page <<a href="mailto:jonpage@comcast.net">jonpage@comcast.net</a>> wrote: </div>
<div>> Avery, into each life some rain must fall. You're going to get soaked. </div>
<div>> </div>
<div>> You have to first raise the upstop rail. The screws are hiding back </div>
<div>> there somewhere. </div>
<div>> Once that is lifted, you can raise the damper, and flip the top </div>
<div>> treble ones upside- </div>
<div>> down to unscrew from the top flange. The heads can be centered over the unison </div>
<div>> with the screw motion. </div>
<div>> </div>
<div>> Check the archives. either Les Smith or Newton Hunt posted some detailed </div>
<div>> info on these many, many years ago. </div>
<div>> </div>
<div>> Regards, </div>
<div>> </div>
<div>> Jon Page </div>
<div></div>
<div></div>