<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.6000.16587" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Hello and Happy New Year to All</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I don't know if my way of replacing random tuning
pins is any better than anyone elses, but I will share it with you anyway.
</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>First back the pin out enough to remove the becket
from the pin hole using a smell screw driver and needle noses pliers. Then back
the pin out the rest of the way. Put your new pin inside the coils of the string
and then start it in the tuning pin hole. Turn it down until it is about 1 and
1/2 turns above being level with the rest of the pins. Put the becket back in
the hole and turn it down until the coil is tight. Level the coils and tune and
you are done.</FONT></DIV>
<DIV><FONT face=Arial size=2>Removing and replacing the becket is a little
trickey on heavy bass strings but I very seldom break a becket.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Gerald McCleskey</FONT></DIV>
<DIV><FONT face=Arial size=2>Shreveport, LA</FONT></DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=piannaman@aol.com
href="mailto:piannaman@aol.com">piannaman@aol.com</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=pianotech@ptg.org
href="mailto:pianotech@ptg.org">pianotech@ptg.org</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Saturday, December 29, 2007 11:16
AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: Mason and Hamlin A, circa
1909: What to do with loose tuning pinsinbass...</DIV>
<DIV><BR></DIV>
<DIV><FONT face="Arial, Helvetica, sans-serif">Martin,<BR><BR>Thanks for this
tip. It will be useful in this and other string related repairs in the
future. Loose pins have several possible fixes short and long
term. Keeping the beckets intact is key to making the repair less
complicated than it could be.<BR></FONT></DIV>
<DIV><BR></DIV>
<DIV style="CLEAR: both">Dave Stahl, RPT<BR>Dave Stahl Piano
Service<BR>dstahlpiano.net</DIV>
<DIV><BR></DIV>
<DIV><BR></DIV>-----Original Message-----<BR>From: Martin Wisenbaker
<mbjwisenbaker@juno.com><BR>To: pianotech@ptg.org<BR>Sent: Sat, 29 Dec
2007 5:50 am<BR>Subject: Re: Mason and Hamlin A, circa 1909: What to do with
loose tuning pins inbass...<BR><BR>
<DIV id=AOLMsgPart_0_50553112-6c78-4d7d-b303-8397ee49624a
style="FONT-SIZE: 12px; MARGIN: 0px; COLOR: rgb(0,0,0); FONT-FAMILY: Tahoma,Verdana,Arial,Sans-Serif; BACKGROUND-COLOR: rgb(255,255,255)"><PRE style="FONT-SIZE: 9pt"><TT>Terry:<BR>
<BR>
If while you are backing out the tuning pin, someone else is pulling up<BR>
on the string at the same time, after getting it out from under the<BR>
damper, it prevents a strain in the other direction on the beckett which<BR>
usually will keep it from breaking off. It works every time for me.<BR>
<BR>
Martin Wisenbaker, RPT<BR>
Houston, Texas <BR>
</TT></PRE></DIV><!-- end of AOLMsgPart_0_50553112-6c78-4d7d-b303-8397ee49624a -->
<DIV class=AOLPromoFooter>
<HR style="MARGIN-TOP: 10px">
More new features than ever. Check out the new <A
href="http://o.aolcdn.com/cdn.webmail.aol.com/mailtour/aol/en-us/text.htm?ncid=aolcmp00050000000003"
target=_blank>AOL Mail</A>!<BR></DIV></BLOCKQUOTE></BODY></HTML>