<!doctype html public "-//W3C//DTD W3 HTML//EN"> <html><head><style type="text/css"></style><title>Balance Rail Bushings</title></head><body> <blockquote type="cite" cite><font face="Arial" color="#000000">What do you use to get such a good, clean cut at the</font></blockquote> <blockquote type="cite" cite><font face="Arial" color="#000000">top when you're finished? Razor blade or what?</font></blockquote> <div><br></div> <div>A razor blade cut through the veneer and cloth against the brass caul.</div> <div><br></div> <div>For the bushing on the left, that was a Bushmaster install. I cut from the</div> <div>center out with a razor blade once the cauls are removed and then sand</div> <div>the buttons with a palm sander and 180 grit paper.</div> <x-sigsep><pre>-- </pre></x-sigsep> <div><br> Regards,<br> <br> Jon Page</div> </body> </html>