<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=utf-8">
<STYLE>BODY {
        FONT-SIZE: 9pt; COLOR: black; FONT-FAMILY: Geneva,Arial,Helvetica,sans-serif; BACKGROUND-COLOR: #ffffff
}
</STYLE>

<META content="MSHTML 6.00.2800.1555" name=GENERATOR></HEAD>
<BODY id=compText bgColor=#ffffff>
<DIV><FONT size=2>Hi,</FONT></DIV>
<DIV><FONT size=2>Do not know for sure but think that you need to take the pedak 
assembly apart and tighten the set screws from under the pedals.</FONT></DIV>
<DIV><FONT size=2>There should be NO side to side movement of the pedal and this 
is controled rith set screws or some other capture devise as I 
recall.</FONT></DIV>
<DIV>Joe Goss RPT<BR>Mother Goose Tools<BR><A 
href="mailto:imatunr@srvinet.com">imatunr@srvinet.com</A><BR><A 
href="http://www.mothergoosetools.com">www.mothergoosetools.com</A></DIV>
<BLOCKQUOTE dir=ltr 
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
  <DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
  <DIV 
  style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B> 
  <A title=dahr-wynn@blakemorepianoservices.com 
  href="mailto:dahr-wynn@blakemorepianoservices.com">Dahr-wynn</A> </DIV>
  <DIV style="FONT: 10pt arial"><B>To:</B> <A title=pianotech@ptg.org 
  href="mailto:pianotech@ptg.org">piano tech list</A> </DIV>
  <DIV style="FONT: 10pt arial"><B>Sent:</B> Tuesday, January 22, 2008 9:37 
  AM</DIV>
  <DIV style="FONT: 10pt arial"><B>Subject:</B> Re: Kohler &amp; Campbell lyre 
  squeek</DIV>
  <DIV><BR></DIV>Thanks for the feedback, William.<BR>I did try all of that, and 
  even tried to get some felt in between the polyester, which usually works with 
  other pedal noise problems.<BR>It seems to be a temporary solution, though, 
  since it has been done before.<BR>I wish I could replace those bushings, but 
  it seems to be a complete assembly..<BR>Dahr-wynn<BR><BR><BR>
  <BLOCKQUOTE 
  style="PADDING-LEFT: 5px; MARGIN-LEFT: 0px; BORDER-LEFT: rgb(0,0,255) 2px solid">-----Original 
    Message----- <BR>From: Willem Blees <WIMBLEES@AOL.COM><BR>Sent: Jan 21, 2008 
    9:45 PM <BR>To: dahr-wynn@blakemorepianoservices.com, pianotech@ptg.org 
    <BR>Subject: Re: Kohler &amp; Campbell lyre squeek 
    <BR><BR></WIMBLEES@AOL.COM>
    <DIV>Dahr-Wynn</DIV>
    <DIV>&nbsp;</DIV>
    <DIV>The problem is not in the pedals. The problem is the polyester rubbing 
    against itself. Make sure the screws that hold the lyre braces are screwed 
    in very tight. Make sure the bolts that hold the lyre box to the bottom of 
    the piano are very tight.&nbsp;If they still squeak, put a little v-j lube 
    between the parts. While you're at it, also check to make sure the bench 
    legs and the leg bolts are tight. &nbsp;<BR><BR></DIV>
    <DIV style="CLEAR: both">Willem (Wim) Blees, RPT<BR>Piano 
    Tuner/Technician<BR>Honolulu, HI<BR>Author of <BR>The Business of Piano 
    Tuning<BR>available from Potter 
    Press<BR>www.pianotuning.com</DIV><BR><BR>-----Original 
    Message-----<BR>From: Dahr-wynn 
    &lt;dahr-wynn@blakemorepianoservices.com&gt;<BR>To: piano tech list 
    &lt;pianotech@ptg.org&gt;<BR>Sent: Mon, 21 Jan 2008 6:19 pm<BR>Subject: 
    Kohler &amp; Campbell lyre squeek<BR><BR>
    <DIV id=AOLMsgPart_0_f9723671-a50a-444b-ac9a-f57354a3d175 
    style="FONT-SIZE: 12px; MARGIN: 0px; COLOR: rgb(0,0,0); FONT-FAMILY: Tahoma,Verdana,Arial,Sans-Serif; BACKGROUND-COLOR: rgb(255,255,255)"><PRE style="FONT-SIZE: 9pt"><TT>Hi all,

I have a customer with a 7' Kohler and Campbell that has pedal noise/squeek.
To her credit, she researched these before purchase and knew it was a problem. 
She was told that the 'Millenium Series' didn't have the same design, so it 
wouldn't have the same problem.

Now she finds that that is not the case.

I have taken the lyre apart and it seems that only replacing the whole assembly 
will solve the problem!
What kind of junk is that?!

So, is there any other wisdom out there to fix this problem?
If I do get a new pedal pivot assembly, how do I know it won't do the same thing 
a few years down the road?

thanks,
Dahr-wynn

Dahr-wynn Blakemore, Technician
Blakemore Piano Services
503.869.2127
360.624.7673
<A href="mailto:Dahr-wynn@BlakemorePianoServices.com">Dahr-wynn@BlakemorePianoServices.com</A>

Music washes away from the soul the dust of everyday life!

</TT></PRE></DIV><ZZZ!-- --="" 
    aolmsgpart_0_f9723671-a50a-444b-ac9a-f57354a3d175="" of="" end=""></ZZZ!-->
    <DIV class=AOLPromoFooter>
    <HR style="MARGIN-TOP: 10px">
    More new features than ever. Check out the new <A 
    href="http://o.aolcdn.com/cdn.webmail.aol.com/mailtour/aol/en-us/text.htm?ncid=aolcmp00050000000003" 
    target=_blank>AOL Mail</A>!<BR></DIV></BLOCKQUOTE><PRE>
Dahr-wynn Blakemore, Technician
Blakemore Piano Services
503.869.2127
360.624.7673
Dahr-wynn@BlakemorePianoServices.com

Music washes away from the soul the dust of everyday life!
</PRE></BLOCKQUOTE></BODY></HTML>