<!doctype html public "-//W3C//DTD W3 HTML//EN">
<html><head><style type="text/css"><!--
blockquote, dl, ul, ol, li { padding-top: 0 ; padding-bottom: 0 }
--></style><title>Wood Specie Insert for Capstan</title></head><body>
<div><font face="Arial" color="#000000">> I find that most
plug cutters produce tapered plug</font></div>
<div><font face="Arial" color="#000000"><br></font></div>
<div><font face="Arial" color="#000000">I use a 1/4" x 1"
cutter to fashion the plugs. I drill into the key
almost</font></div>
<div><font face="Arial" color="#000000">to the bottom and then rip the
bottom on a band saw and they fall right out.</font></div>
<div><br></div>
<div>The start of the plug is slightly narrower as the bit engaged and
that goes</div>
<div>into the capstan hole first. I glue them in with PVC-E so
there isn't a rigid</div>
<div>glue line to cause the bit to wander.</div>
<div><br></div>
<div>I can reinstall the new capstan right on the margin with no
problems.</div>
<x-sigsep><pre>--
</pre></x-sigsep>
<div><br>
Regards,<br>
<br>
Jon Page</div>
</body>
</html>