Hey all  I know ...I know there is no remedy for verdigris .... except a new parts transplant... but the other day my 83 year old Dad & I were looking a perfectly useable set of vintage Steinway wippens except for the mild case of creeping green crud so, We were lamenting having to toss a beautiful set of original Steinway wippens in the trash. We started brainstorming how we could solve this given the contamination is in the wood.  Now I know many of us have re-pinned & re- bushed ...put on new flanges etc. & in the end all for nothing as it returns, But with a good set of wippens approaching 1000 bucks the idea has my attention.   I told my Dad I was thinking about how to cut out the birds eye & then machine a new insert with birds eye & all. My thought was that if the new insert was put in with epoxy that this would act as a verdigris barrier from entering back into the new wood. Then My Pops says "why not just coat the existing birds eye with epoxy & slide a coated pin thru the hole to seal up the exposed inner wood which should prove de a barrier to any further contamination". Then pin on new flanges. I thought the idea had merit.   I mean for a few short hours of pinning & coating an original set of beautifully made & machined  maple wippens could be preserved & re-used at any level of performance required.    How bout some discussion.   Dale   <div id='u8CA544CF066822E-167C-1D71' class='aol_ad_footer'><HR style="MARGIN-TOP: 10px">Supercharge your AIM. Get the <A title="http://download.aim.com/client/aimtoolbar?NCID=aolcmp00300000002586" href="http://download.aim.com/client/aimtoolbar?NCID=aolcmp00300000002586" target="_blank">AIM toolbar</A> for your browser. </div>