<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD><TITLE>Steinway M Backcheck Problem</TITLE> <META http-equiv=Content-Type content="text/html; charset=iso-8859-1"> <STYLE type=text/css>BLOCKQUOTE { PADDING-BOTTOM: 0px; PADDING-TOP: 0px } DL { PADDING-BOTTOM: 0px; PADDING-TOP: 0px } UL { PADDING-BOTTOM: 0px; PADDING-TOP: 0px } OL { PADDING-BOTTOM: 0px; PADDING-TOP: 0px } LI { PADDING-BOTTOM: 0px; PADDING-TOP: 0px } </STYLE> <META content="MSHTML 6.00.6000.16608" name=GENERATOR></HEAD> <BODY bgColor=#ffffff> <DIV><FONT face="Bookman Old Style" size=2>Al,</FONT></DIV> <DIV><FONT face="Bookman Old Style" size=2></FONT> </DIV> <DIV><FONT face="Bookman Old Style" size=2>Have you double-checked (ha-ha) the backcheck height??</FONT></DIV> <DIV><FONT face="Bookman Old Style" size=2></FONT> </DIV> <DIV><FONT face="Bookman Old Style" size=2>I'd guess your problem would lie in height or angle, given the age of the parts.  I wouldn't concern myself where the bend is to establish the angle as long as the angle is correct.  I also would caution against roughing the checks any more.  If they are soft and like new, they don't need it.</FONT></DIV> <DIV><FONT face="Bookman Old Style" size=2></FONT> </DIV> <DIV><FONT face="Bookman Old Style" size=2>Another possibility: have you tried setting checking in the piano first, on a few samples?  Is it possible your bench set-up is enough different than your piano that it is unreliable?  </FONT></DIV> <DIV><FONT face="Bookman Old Style" size=2></FONT> </DIV> <DIV><FONT face="Bookman Old Style" size=2>Good luck,</FONT></DIV> <DIV><FONT face="Bookman Old Style" size=2>William R. Monroe</FONT></DIV> <DIV><FONT face="Bookman Old Style" size=2></FONT> </DIV> <DIV><FONT face="Bookman Old Style" size=2></FONT> </DIV> <DIV><B>Subject:</B> Re: Steinway M Backcheck Problem</DIV> <BLOCKQUOTE dir=ltr style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px"> <DIV><BR></DIV> <DIV><FONT face=Arial>Thanks Jon, good info, I'll check the angle and measure the arc against the hammers I arc myself. I also brushed the buckskin. They are soft and like new, but I will try and rough them up a little with some sandpaper to see if that helps any.</FONT></DIV> <DIV><FONT face=Arial></FONT> </DIV> <DIV><FONT face=Arial>Al Guecia</FONT></DIV></BLOCKQUOTE></BODY></HTML>