<div>I tuned a Kimball Spinet this morning (s/n A12066).&nbsp; The overall tuning pin torque was between 30-50 inch lbs.&nbsp; That is for a very marginal tuning at best.&nbsp; However, the left&nbsp;pin of C-40 and the right/left&nbsp;pin of C#-41 was less than 30 inch lbs.&nbsp; I mean literally the pins would take off without applying but a fraction of pressure on the hammer.&nbsp; What would be the best fix for those three pins?&nbsp; I know, the entire piano could use something, but with those three pins in particular what would be a good solution?&nbsp; I was able to stable the tuning throughout the piano with what I had to work with, but with those pins it'll be impossible to hold it without some fix.</div>  <div>&nbsp;</div>  <div>&nbsp;</div>  <div>Thank you</div>  <div>Matthew</div><p>&#32;

      <hr size=1>Never miss a thing.  <a href="http://us.rd.yahoo.com/evt=51438/*http://www.yahoo.com/r/hs"> Make Yahoo your homepage.</a>