<!doctype html public "-//W3C//DTD W3 HTML//EN">
<html><head><style type="text/css"><!--
blockquote, dl, ul, ol, li { padding-top: 0 ; padding-bottom: 0 }
--></style><title>RE: Bass Bridge</title></head><body>
<div>Mathew,</div>
<div><br></div>
<div>Another consideration, if you are contemplating a rebuild of a
piano with an apron, is to do a new bass-bridge design and remove the
apron altogether. About the only good purpose which I can think of,
for an apron, is it provided sales people with a feature for
discussion, which does absolutely nothing positive for the tone of the
instrument.</div>
<div><br></div>
<div>If you are interested in further information on this topic you'll
find plenty of discussion in the archives.</div>
<div><br></div>
<div>To all of those going to Anaheim next week, have a good time. My
colleague from Aus, Michael Ryan is on his way. I cannot come this
year because I'm working on the design of a new grand piano for a
planned launch at next year's IAPBT meeting in Queensland Australia.
The work load to get the tooling and the piano (a 173 cm [5'8"]
grand piano measured with the top lid on) built by September next year
will be considerable.</div>
<div><br></div>
<div>Ron O.</div>
<div><br></div>
<div><br></div>
<blockquote type="cite" cite><font face="Arial" size="-1"
color="#0000FF">Matthew,</font></blockquote>
<blockquote type="cite" cite> </blockquote>
<blockquote type="cite" cite><font face="Arial" size="-1"
color="#0000FF"> As Alicia said, the piece the bass bridge
is connected to, when it is constructed offset rather than being glued
directly to the soundboard, is called an "apron" and
sometimes a "shelf." Cracks in the apron can be a
problem. It is important to check the glue joint between the
apron/bridge and also the apron/soundboard strip at the top edge of
the apron. If the glue joints are solid, the cracks in the apron
may not be a serious problem unless things get worse. Ideally,
the apron should be without cracks, but that may be down the list of
priorities with this piano, depending on how extensive the repairs and
service will be. The needs and available funds of the piano
owner will affect the priorities.</font></blockquote>
<blockquote type="cite" cite> </blockquote>
<blockquote type="cite" cite><font face="Arial" size="-1"
color="#0000FF">Claude Harding</font></blockquote>
<blockquote type="cite" cite><br></blockquote>
<blockquote type="cite" cite>
<hr></blockquote>
<blockquote type="cite" cite><font face="Tahoma"
size="-1"><b>From:</b> pianotech-bounces@ptg.org
[mailto:pianotech-bounces@ptg.org]<b> On Behalf Of</b> Matthew
Todd<br>
<b>Sent:</b> Saturday, June 14, 2008 12:47 PM<br>
<b>To:</b> pianotech@ptg.org<br>
<b>Subject:</b> Bass Bridge</font><br>
<font face="Tahoma" size="-1"></font></blockquote>
<blockquote type="cite" cite>Went to evaluate a WP Haines upright.
Please forgive my ignorance, but what is the piece of wood the
bass bridge sits on and is between the bridge and soundboard
called? Anyway, the bridge looks good, but that section of wood
has several cracks. Will that cause just as much tuning
instability as if the bridge were cracked?</blockquote>
<blockquote type="cite" cite> </blockquote>
<blockquote type="cite" cite> </blockquote>
<blockquote type="cite" cite>Thanks,</blockquote>
<blockquote type="cite" cite>Matthew</blockquote>
<div><br></div>
<div><br></div>
<x-sigsep><pre>--
</pre></x-sigsep>
<div><font face="Times New Roman" size="+1" color="#0000FF"><b>OVERS
PIANOS - SYDNEY</b></font></div>
<div><font color="#000000"><i> </i></font><font
color="#0000FF"><i>Grand Piano Manufacturers</i></font><font
color="#000000"><br>
_______________________</font></div>
<div><font size="-2" color="#000000"><br>
</font><font color="#000000">Web
http://overspianos.com.au</font></div>
<div><font color="#000000">mailto:ron@overspianos.com.au<br>
_______________________</font></div>
</body>
</html>