<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <html> <head> <title>RE: Swiveling damper problem</title> <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"/> <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"/> <style> </style> </head> <body bgcolor="#ffffff"> <div> pull the damper, push out the wire and flatten it...swedge it a bit on an anvil and tap it back in... David Ilvedson, RPT Pacifica, CA 94044 <div style="padding-right: 5px; padding-left: 5px; padding-bottom: 5px; border-left: #000000 3px solid; padding-top: 5px"> <hr/>Original message From: "Piano Boutique" <pianoboutique@comcast.net> </pianoboutique@comcast.net> To: pianotech@ptg.org Received: 6/23/2008 4:18:58 PM Subject: Swiveling damper problem <div> Greetings again list,   Joe was so helpful with my glue applicator problem that I thought I would ask you all another question   I have a piano that where the wire goes into the damper head on a grand is loose.   I have been lead to believe that CA glue will not work on metal and that is why CA glue works on tuning pins in the pin block.   Does anyone have a suggestion as to how I might make this fit tighter, so the damper does not swivel on the wire.   Thanks,   William       </div> <div>PIANO BOUTIQUE William Benjamin The tuner alone, Preserves the tone.</div> </div> </div> </body> </html>