<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html> <head> <meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type"> </head> <body bgcolor="#ffffff" text="#000000"> There's a product called "Slide All" by Elmer's. It's in the Schaff Catalog. It's mostly teflon with some kind of propellant.  Might also be worth a look.<br> les bartlett<br> houston<br> <br> Euphonious Thumpe wrote: <blockquote cite="mid:904470.80405.qm@web34408.mail.mud.yahoo.com" type="cite"> <pre wrap="">Very UNREASONABLE!!! This stuff's NASTY!!! ( The studies saying otherwise are all "industry funded"---BEWARE!!! At worst, dilute the Teflon powder in Protek and brush on knuckles. This way, when the Protek evaporates, a smooth, non-powdery coating will be on the knuckles. Minimal spilling ( or blowing ) around. Euphonious Thumpe --- On Wed, 6/25/08, holly quigley <a class="moz-txt-link-rfc2396E" href="mailto:hollyquigley@gmail.com"><hollyquigley@gmail.com></a> wrote: </pre> <blockquote type="cite"> <pre wrap="">From: holly quigley <a class="moz-txt-link-rfc2396E" href="mailto:hollyquigley@gmail.com"><hollyquigley@gmail.com></a> Subject: TFL50 on knuckles? To: <a class="moz-txt-link-abbreviated" href="mailto:pianotech@ptg.org">pianotech@ptg.org</a> Date: Wednesday, June 25, 2008, 2:39 PM So I'm doing a knuckle replacement job, and I swear it looks like someone actually sprayed the knuckles with TFL50. There's a white film on the shanks and tops of the whippens that looks like it could only have been sprayed on. Teflon powder, I've heard of, yes - but using a spray? Is this a common or reasonable practice? Just curious... -Holly Quigley </pre> </blockquote> <pre wrap=""> </pre> </blockquote> </body> </html>