<html>
<body>
Jack -<br>
If you've cleaned up the keys nicely, and if you have a good eye and
hand, or know someone who does, you could do a rather un-cheap looking
job by hand, with a good (not too thin) ink. Lately, for the ones
that matter, I've been using steel number punches and then going over
them with a fine-tip ink marker. It takes some time and care, but I
prefer the look to printed numbers.<br><br>
David Skolnik<br>
Hastings on Hudson, NY<br><br>
<br>
At 01:19 AM 7/3/2008, you wrote:<br>
<blockquote type=cite class=cite cite=""><font size=2>I am rebuilding a
keyboard and want to put new numbers on the keys. The originals numbers
were very dull and <br>
after I cleaned them and lightly sanded them they are no longer
visible.<br>
I do not want to pencil mark them with numbers as I think this looks
cheap so I want to<br>
stamp them. Any methods of stamping keys with ink, or other
suggestions?<br>
</font> <br>
<font size=2>Regards,<br>
Jack Houweling<br>
</font> <br>
<br>
<br>
No virus found in this incoming message.<br>
Checked by AVG. <br>
Version: 7.5.524 / Virus Database: 270.4.4/1531 - Release Date: 7/2/2008
7:02 PM</blockquote></body>
<br>
</html>