<!doctype html public "-//W3C//DTD W3 HTML//EN">
<html><head><style type="text/css"><!--
blockquote, dl, ul, ol, li { padding-top: 0 ; padding-bottom: 0 }
--></style><title>Young Chang lyre supports
buzzing</title></head><body>
<blockquote type="cite" cite><font face="Arial"
color="#000000"> In most lyres it is safest to take it apart and
re-wedge the posts with good glue.</font></blockquote>
<div><br></div>
<div>Not with Yamaha oval tenons with double wedges. A nightmare to
take apart</div>
<div>and a bigger one to try to glue the polyester surfaces.</div>
<div><br></div>
<div>It is better to use electrical tape to seal around the posts and
top block or box</div>
<div>and fill with thin epoxy. I have even counter sunk a long hex
head sheet metal</div>
<div>screw alongside the tenon to lock it all together afterwards.
Another method</div>
<div>on the top block is to install the screws from the rear
completely through the tenon.</div>
<div><br>
Regards,<br>
<br>
Jon Page</div>
</body>
</html>