<div dir="ltr"><br><br> <div class="gmail_quote">On Thu, Aug 7, 2008 at 8:52 PM, Matthew Todd <span dir="ltr"><<a href="mailto:toddpianoworks@att.net">toddpianoworks@att.net</a>></span> wrote:<br> <blockquote class="gmail_quote" style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid"> <div>Have any of you used the tuning pin and coil cleaner from Schaff?  I was just wondering if it was any good.  If it produces good results without scratching the pins.</div> <div> </div> <div> </div> <div>Thanks,</div> <div>Matthew</div></blockquote></div> <div><br>Hi Matthew,</div> <div> </div> <div>I had occasion to try using it once about 15 years ago and decided that was enough. The 24 rubber bushings fit into the steel cylinder, one at a time of course, you then dip it into the compound and work it up and down over the pin and coil.</div> <div>IMHO If you use an electric drill you end up with spots of compound everywhere. If you use a hand drill prepare yourself for an all day job, finding a way to clean up the spots and blobs of compound that inevitably drip and dribble on the plate. When you are finished the pins and coils may be brighter but the plate and pressure bar or agraffes won't be. </div> <div> </div> <div>Mike<br clear="all"><br>-- <br>I feel sorry for the person who can't get genuinely excited about his work. Not only will he never be satisfied, but he will never achieve anything worthwhile. <br>Walter Chrysler <br> <br><br><br>Michael Magness<br>Magness Piano Service<br>608-786-4404<br><a href="http://www.IFixPianos.com">www.IFixPianos.com</a><br>email <a href="mailto:mike@ifixpianos.com">mike@ifixpianos.com</a><br></div></div>