<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.6001.18063" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><STRONG><FONT face=Arial size=4>Sometimes, I will insert a smaller pin,
then 'follow' it. This helps to keep the flange in alignment, and will lessen
the chance of pushing one bushing out, due to a small
misalignment.</FONT></STRONG></DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=tomtuner@verizon.net href="mailto:tomtuner@verizon.net">Tom
Driscoll</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=pianotech@ptg.org
href="mailto:pianotech@ptg.org">Pianotech List</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Thursday, August 14, 2008 10:00
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: Center Pin</DIV>
<DIV><BR></DIV>
<DIV><FONT face=Arial size=2>Matthew,</FONT></DIV>
<DIV><FONT face=Arial size=2>You can feel the birdseye with the pin in your
fingers.Once I find the center of the hole I use the popular
inserter-extracter tool to push the pin into the birdseye then take care
to keep the other bushing in line with the pin as I SLOWLY push the pin
through. Clip with a good set of flush cutters and done.I choose not to file
the cut end but others may advise different.</FONT></DIV>
<DIV><FONT face=Arial size=2>.</FONT></DIV>
<DIV><FONT face=Arial size=2>Best wishes,</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=Arial size=2>Tom Driscoll</FONT></DIV>
<DIV><FONT face=Arial size=2> p.s. no vicegrips
IMHO</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=toddpianoworks@att.net href="mailto:toddpianoworks@att.net">Matthew
Todd</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=pianotech@ptg.org
href="mailto:pianotech@ptg.org">pianotech@ptg.org</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Thursday, August 14, 2008 7:45
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Center Pin</DIV>
<DIV><BR></DIV>
<DIV>What is the best way to hold a center pin while you get it started to
push it through the hole?</DIV>
<DIV> </DIV>
<DIV>Matthew</DIV><PRE> </PRE></BLOCKQUOTE></BLOCKQUOTE>
<DIV>John M.Ross<BR>Windsor, Nova Scotia, Canada.</DIV></BODY></HTML>