<!doctype html public "-//W3C//DTD W3 HTML//EN">
<html><head><style type="text/css"><!--
blockquote, dl, ul, ol, li { padding-top: 0 ; padding-bottom: 0 }
--></style><title>Center Pin</title></head><body>
<div>><font face="Arial" color="#000000"> ...I knocked out a few
bushings</font>...</div>
<div><br></div>
<div>To avoid damaging a bushing, use a chase pin. This is usually a
#19</div>
<div>or smaller but actually any pin that slides through the birdseye
easily</div>
<div>will do. This will align the holes and insure that no damage
occurs.</div>
<div><br></div>
<div>SIze the bushings and insert the chase pin, push the new pin in
until</div>
<div>it stops at the birdseye, the chase pin will be pushed out
partly. Finish</div>
<div>installation with a pinning tool.</div>
<x-sigsep><pre>--
</pre></x-sigsep>
<div><br>
Regards,<br>
<br>
Jon Page</div>
</body>
</html>