<HTML><FONT FACE=arial,helvetica><HTML><FONT COLOR="#000000" FACE="Geneva" FAMILY="SANSSERIF" SIZE="2"><BR>
In a message dated 8/15/08 11:21:42 AM, nelsong@intune88.com writes:<BR>
<BR>
<BR>
<BLOCKQUOTE CITE STYLE="BORDER-LEFT: #0000ff 2px solid; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px; PADDING-LEFT: 5px" TYPE="CITE"></FONT><FONT COLOR="#000000" FACE="Arial" FAMILY="SANSSERIF" SIZE="2">Hello list,</FONT><FONT COLOR="#000000" FACE="Geneva" FAMILY="SANSSERIF" SIZE="2"><BR>
</FONT><FONT COLOR="#000000" FACE="Arial" FAMILY="SANSSERIF" SIZE="2"> I have been trying to modify three legs for new casters. It required that I cut the legs short by 1.2 inch to maintain hight(done). In addition it requires that I enlarge the existing .86 inch hole to 2 1/8 inch at .25 inch deep.</FONT><FONT COLOR="#000000" FACE="Geneva" FAMILY="SANSSERIF" SIZE="2"><BR>
</FONT><FONT COLOR="#000000" FACE="Arial" FAMILY="SANSSERIF" SIZE="2"> In addition the existing .86 hole needs to be deeper by 1.5+ inch but it is oversize by about .085 inch.</FONT><FONT COLOR="#000000" FACE="Geneva" FAMILY="SANSSERIF" SIZE="2"><BR>
</FONT><FONT COLOR="#000000" FACE="Arial" FAMILY="SANSSERIF" SIZE="2"> I have tried using my drill press and a forstner bit for the large shallow hole but could find no way to secure the leg enought to get it started.</FONT><FONT COLOR="#000000" FACE="Geneva" FAMILY="SANSSERIF" SIZE="2"><BR>
<BR>
</BLOCKQUOTE></FONT><FONT COLOR="#000000" FACE="Geneva" FAMILY="SANSSERIF" SIZE="2"><BR>
<BR>
Gene;<BR>
Try plugging the hole flush with the old surface....then you will be able to hand drill appropiate sized holes without bit wandering....worked for me.<BR>
Jim Bryant (FL)</FONT><FONT COLOR="#000000" FACE="Geneva" FAMILY="SANSSERIF" SIZE="2"></FONT><BR><BR><BR>**************<BR>Looking for a car that's sporty, fun and fits in your budget? Read reviews on AOL Autos.<BR> (http://autos.aol.com/cars-Volkswagen-Jetta-2009/expert-review?ncid=aolaut00030000000007 )</HTML>