<div dir="ltr"><div class="gmail_quote">Yes, it gets easier. You didn't ride a bike well when you first learned, but it got easier, right? <G></div><div class="gmail_quote"><br></div><div class="gmail_quote">I never break strings. They break when they are ready. But, if you'll slightly lower the tension before you raise it, you might avoid the kind of breakages that is due to rust adhesion (to the plate/pins). I generally bump the pin down a bit just to hear it move very slightly. Then raise as I would on a piano with no visible rust.</div>
<div class="gmail_quote"><br></div><div class="gmail_quote">You could raise the entire 50 cents in one pass. I personally wouldn't anticipate a stable fine tuning after just one pitch raise pass. What I'm doing with a pitch raise greater than 30 cents is two quick pitch raises, with a followup fine tuning in 3-4 weeks. (Unless of course the piano is needed for some kind of function before then.)</div>
<div class="gmail_quote"><br></div><div class="gmail_quote">The clicking may have come from the agraffes.</div><div class="gmail_quote"><br></div><div class="gmail_quote">What you can learn from "this frightening experience" is all the stuff that most of us have already learned from the experience of doing what you are now doing. How's that for encouragement? <G></div>
<div class="gmail_quote"><br></div><div class="gmail_quote">It's all incremental. Some here on the list have bigger increments, but it's still bit by bit until you get it.</div><div class="gmail_quote"><br></div>
<div class="gmail_quote">--</div><div class="gmail_quote">JF</div><div class="gmail_quote"><br></div><div class="gmail_quote"><br></div><div class="gmail_quote">On Fri, Aug 15, 2008 at 10:17 PM, Matthew Todd <span dir="ltr"><<a href="mailto:toddpianoworks@att.net">toddpianoworks@att.net</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;"><div> <br></div> <div>I pitch raised a Baldwin Grand today. This was my first one of this caliber. It was 47 to 50 cents flat, with lots of the ole' rust. There were a lot of clicking pins as I raised pitch, I guess due to the rust, I'm not sure.</div>
<div> </div> <div>I did two pitch raises actually. In my first pass, I raised to about 15 cents flat. My second pass, I did to about 25 - 30 cents sharp. I don't know if I was chicken, but I had a BIG cringe factor goin' on while I did this.</div>
<div> </div> <div>As I get more experience, will I just go for the whole thing the first time? What can I learn from this frightening time in my career?</div> <div> </div> <div>I did not break a single string. But get this, I broke B7/C8 while I was strip muting. Has this happened to anyone?</div>
<div> </div> <div>All in all, I gained a big experience today.</div>
<div> </div> <div>I'm a pansy, I know. Does it get any easier??</div> <div><br></div></blockquote></div>
</div>