<div>Don't jeez me David, lol.  I was just sharing the frustration I had.  I may not be rich like you to afford center pins at 0.02 cents a piece, come on! (j/k).</div> <div> </div> <div>Matthew David Ilvedson <ilvey@sbcglobal.net> wrote:</div> <BLOCKQUOTE class=replbq style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #1010ff 2px solid">I apologize to Scott...that is Matthew I'm writing to....;-[ David Ilvedson, RPT Pacifica, CA 94044 ----- Original message ---------------------------------------- From: "Matthew Todd" <TODDPIANOWORKS@ATT.NET> To: "Pianotech List" <PIANOTECH@PTG.ORG> Received: 8/16/2008 8:06:06 PM Subject: RE: Center Pin >Speaking of this, does anyone have any idea why Schaff packs their center pin >cases so full, so when you need one, 15 come out, and it's almost impossible to get >them back in! >Scott Jackson <SCOTTWAYNEJACKSON@HOTMAIL.COM>wrote: Another beautiful >presentation John. Thank you. >Scott Jackson >Mt Keira, NSW, Australia. >-----Original Message----- >With the nippers. I have done hundreds of thosands of centres and >never needed anything else. >I have published a rough guide here: >it should be possible to repin a set of 88 centres in less than 90 >minutes including set-up time. >JD >TODD PIANO WORKS >Matthew Todd, Piano Technician >(979) 248-9578 > http://www.toddpianoworks.com </BLOCKQUOTE>