<!doctype html public "-//W3C//DTD W3 HTML//EN">
<html><head><style type="text/css"><!--
blockquote, dl, ul, ol, li { padding-top: 0 ; padding-bottom: 0 }
--></style><title>Sizing centers with alcohol &
water</title></head><body>
<div><font face="Arial" color="#000000">>some of them are too deep;
rebushing rather than easing is necessary if that's the
case.</font></div>
<div><br></div>
<div>A bushing that is too deep and induces friction can be trimmed
with with a chisel point Exacto blade. I use this blade as a
follow-up on new bushings to remove any glue</div>
<div>beads that might form at the ends of the bushings. It also works
if a felt has extended</div>
<div>too far into the mortice.</div>
<x-sigsep><pre>--
</pre></x-sigsep>
<div><br>
Regards,<br>
<br>
Jon Page</div>
</body>
</html>